RESTAURACION DE RAYONES EN CABINAS Y DEMÁS PARTES CON NOVUS

Bueno muchades, aquí les pongo un par de links de como se usa el NOVUS, estos liquidos los venden en MICRO MARK en USA, no los e buscado en otras tiendas





Acá en Guatemala, los está trayendo CEMACO

[Tienes que estar registrado y conectado para ver este vínculo]

En el siquiente link lo usan para reparar CD's/DVD's
[Tienes que estar registrado y conectado para ver este vínculo]


tomado de: [Tienes que estar registrado y conectado para ver este vínculo]
NOTE : NOT RECOMMENDED FOR USE ON COATED PLASTICS

Novus # 1 If the surface is extremely dirty, apply NOVUS #1 liberallw and wipe using long sweeping strokes. DO NOT use pressure at this time or large dirt particles may scratch the plastic.Re-apply NOVUS #1 polish using short circular strokes witha a clean portion of the polishing cloth.When the surface is thoroughly clean and uniformly covered, buff to a slippery glaze with a clean cloth. Surfacees buffed to a high glaze are more resistant to dust and future scratching.Re-apply NOVUS #1 regularly to maintain the antistatic, smudge and scratch resistant properties

NOVUS # 2 Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove them. If the surface is dirty, clean with NOVUS #1 before applying NOVUS #2Shake well Test in an inconspicuous aera first.Apply NOVUS #2 liberally. Using a clean soft cloth, polish with a back-ad forth motion at right angles to the scratches,. Keep the cloth saturated with polish at all times.When the worst scratches have been polished out, Re-apply NOVUS #2 in a circular motion to the entire surface using short circulr strokes and light pressure. Allow to dry to a light hazeUsing a clean cloth buff surface to a slippery glaze usig firm short strokes. This procedureis imperative in achieving best results. For heavy scratches multiple applications of NOVUS #2 or applicatio on NOVUS # 3 may be required. Follow with NOVUS #1 for best results.With repeated use , NOVUS #2 restores faded and discolored plastics.

NOVUS # 3 Removes heavy scratchs and abrasions from most acrylic plastics. Use when damage is too severe to be rstored with Novus #2 polish.NOTE : NOT RECOMMENDED FOR USE ON COATED PLASTICS.Remove surface dirt with Novus #1AShake well, test in an inconspicuous areaApply Novus #3 liberally. Usa a clean soft cloth, polish with a back-and forth motion at right angles to the scratches. Keep the cloth saturated at all timesContinue polishing until fine scratches remain. Using a clean cloth remove all remaining polish.Using a clean cloth apply Novus #2 in a circular motion uniformly to enitire surface. Polish using ligh pressure until Novus #2 dries to light haze.Using a clean portion of the cloth, buff the surface clean.For best results follow up with Novus #1.

y un videito que dan ganas de probar jiji

normalmente se usa para eso, pero modelisticamente se utiliza para pulir la pintura de los carros a escala , para lograr el "BRILLO DE CONCURSO", GRACIAS VOS M1 POR EL TIP


ya saben muchades, si se juntan un par compran mita y mita y luego se reparten, en realidad no se utiliza mucho y un bote para uno solo es muuucho